Bring your spraywallto life.
SMALL DETAILS. A BRIGHTER WALL.
A light at the heart
of every hold.
Follow the light from the circuit board
to the front of your climb.
Through-the-bolt lighting
The rear ring PCB feeds a curved light guide through the hollow M10 bolt. Light exits through the protective front plug at the centre of the climbing hold.
Enable WebGL in your browser to explore the 3D assembly.
Concept illustration · proportions are illustrative
Every part has a purpose.
The hold, hollow bolt, panel, ring PCB and light guide—separated so you can see how they connect.
Interactive Game Modes
Compete and train with built-in retro arcade games.
Floor is Lava
Rows light up every 2s. Stay above the rising orange lights to win!
Reaction Hold
A target flashes every 2s. Be the first to touch it to score points.
Bouncing Ball
Avoid the 2x2 pink ball cluster as it reflects randomly off the wall!
The WayUpClimb app
Browse, create and share climbs, then bring them to life on your wall.
CUSTOM SPRAYWALL INTEGRATION
Make any M10-bolt climbing wall interactive
WayUpClimb combines through-the-bolt LED illumination, Bluetooth control and a companion app to turn an existing or newly built spraywall into a connected climbing experience.
Planning a complete spraywall integration?
Every spraywall is different. Tell us the wall size, number of holds and installation requirements, and we’ll prepare a tailored WayUpClimb quote.
YOUR MOONBOARD. ILLUMINATED.
The same hold.
More visible light.
Explore the wooden hold, hollow bolt
and LED secured behind your board.
A light through your MoonBoard hold.
The hollow bolt secures the wooden hold to the plywood panel. The WS2811 RGB pixel sits in the rear housing, and the light guide and front plug carry its light forward.
Assembly illustration · proportions are illustrative
A familiar hold, opened up.
The wooden MoonBoard hold and plywood panel separate to reveal the plug, hollow bolt, light guide, WS2811 LED and rear housing.
MOONBOARD UPGRADE
Custom LED Upgrade for Your MoonBoard
Compatible with every MoonBoard wall.
Perfect visibilitySee the active hold clearly.
The LED shines through the centre bolt, so the hold does not hide it from view, even on an angled board.
No pre-drilled LED holesLight travels through the bolt.
New panels only need the standard hold bolt holes. There is no separate hole to drill below each hold for an LED.
Same system, just betterUpgrade an existing or new MoonBoard.
The through-the-bolt lighting adds visibility while keeping your MoonBoard setup and climbing experience intact.
Checking early-bird availability…
PLAN YOUR MOONBOARD
Estimate your MoonBoard pre-order
Enter the number of holds on your MoonBoard to see your pre-order estimate.
Regular price €912
You save €60
€4.26 per hold (regular €4.56)
Shipping is included. Final price and availability are confirmed in your quote.
Request a pre-order quoteWayUpClimb FAQs
The practical details for planning your interactive wall.
Which climbing walls are compatible?
WayUpClimb supports walls of any dimension when the holds are attached using M10 bolts. It is suitable for existing walls and newly built walls.
Is installation included?
Yes. Installation is included in the WayUpClimb quote. The final scope is confirmed after reviewing your wall and requirements.
How is the MoonBoard integration priced?
The regular price is €4.56 per hold. The first 10 customers can request the limited pre-order price of €4.26 per hold, subject to availability. Shipping is included. The final price is confirmed in the quote.
Where is WayUpClimb available?
WayUpClimb is currently available outside Asia. The current limitation is that the companion app is not supported in Asia.
Does it work with MoonBoard panels?
Yes. The upgrade is compatible with every MoonBoard wall, including existing 25° and 40° setups. The LED travels through the bolt, so no separate LED hole is needed in new panels.